Letoto lena la lipompo tsa vacuum tsa mofuta oa Roots li ke ke tsa sebelisoa li le mong.E hloka ho sebelisoa letotong le pompo ea vacuum ea pele ho sethaleng ho eketsa lebelo la ho phunya pompo ea pele ho sethaleng ha khatello e le tlase ho feta 1.3 × 103 ~ 1.3 × 10-1 Pa. Sebopeho se entsoe ka tse peli tse 8. -karolo e nang le sebopeho sa rotor le casing ea rotor, 'me li-rotor tse peli ha li kopane 'me li potoloha ka litsela tse fapaneng ka ho lumellana.
Mofuta ona oa pompo, pakeng tsa li-rotor le pakeng tsa rotor le casing ea ka ntle, ha o amane, 'me ha ho hlokahale hore u tšoenyehe ka tahlehelo ea likhohlano.Ka hona, ha ho na lubricant e hlokahalang ka kamoreng ea rotor.Ka hona, bakeng sa tikoloho e sebetsang ea mouoane oa metsi le mouoane o qhibilihisang, o na le ts'ebetso e tsitsitseng ea ho qeta.
ZJ series Roots vacuum lipompo li sebelisoa haholo ho koahela mouoane, magnetron sputtering, ion plating, optical coating, sebōpi sa kristale e le 'ngoe, sebōpi sa polycrystalline, sebōpi sa sintering, sebōpi se timang, ho omisa, ho omisa, ho omisa tsamaiso ea metsi, ho omisa le ho tsuba ha metsi. , ente ea kristale ea metsi, lihatsetsi, li-conditioner tsa lapeng, li-air conditioner tse bohareng, melapo ea ho tsoa ka mokhoa o itekanetseng bakeng sa mabone a ka morao, lisebelisoa tsa ho qeta le liindasteri tse ling tsa vacuum.
Litekanyetso tsa tekheniki tsa letoto la ZJ Roots vacuum pump
| Mohlala | ZJ-30 | ZJ-70 | ZJ-150 | ZJ-300 | ||
| Sekhahla sa ho pompa m3/h (L/mots) | 50HZ | 100(1667) | 280(4670) | 500(8330) | 1000(16667) | |
| 60HZ | 120(2000) | 330(5500) | 600(1000) | 1200(20000) | ||
| Max.khatello e kenang (ha o ntse o sebetsa) | 50HZ | 1.2X103 | 1.3X103 | |||
| 60HZ | 9.3X102 | 1.1X103 | ||||
| Phapang e kholo e lumelletsoeng ea khatello (Pa) | 50HZ | 4X103 | 7.3X103 | |||
| 60HZ | 3.3X103 | 6x103 | ||||
| Khatello ea ho qetela (Pa) | 1X10-1 | |||||
| Pompo e tloaelehileng ea mahoashe (m3/h) | 16 | 40, 60 | 90,150 | 150,240 | ||
| Motor(2poles) (KW) | 0.4 | 0.75 | 2.2 | 3.7 | ||
| Sebopeho sa oli ea mohloaare | Oli ea Pump ea Vacuum | |||||
| Bophahamo ba Oli (L) | 0.4 | 0.8 | 1.6 | 2.0 | ||
| Metsi a Pholisang | Phallo(L/mots) | / | 2*1 | 2 | 3 | |
| Phapang ea khatello (MPa) | / | 0.1 | ||||
| Mocheso oa metsi (0C) | / | 5-30*2 | ||||
| Boima (Kg) | 30 | 51 | 79.5 | 115 | ||
| Inlet Dia.(mm) | 50 | 80 | 80 | 100 | ||
| Outlet Dia.(mm) | 50 | 80 | 80 | 80 | ||
Tlhokomelo e nepahetseng nakong ea tlhahlobo ea kamehla, ka kopo.Nako ea tlhokomelo e fapana ho ea ka sepheo, nako ea tlhahlobo, tšebeliso ea pele ho hang ka letsatsi, ha ho bothata, libeke ho tloha ka lekhetlo la pele ka Mantaha, ka mor'a moo e ka hlophisoa hang ka khoeli. tekanyo ea tlhahlobo ea pono, thuso, bona boemo ba sesebelisoa, etsa tlhahiso ea ho netefatsa hang ka letsatsi.Ts'ebetsong ea tšebeliso, hlahloba bonyane hang ka matsatsi a mararo ho lintho tse latelang.
1.Palo ea oli e tlotsang e pakeng tsa mela e 'meli ea boemo ba oli.
2. Lubricating oli hore na fetola mmala.
3. Hore na metsi a pholileng ho latela lipehelo tsa phihlello ea sephethephethe.
4. Boteng ba molumo o sa tloaelehang.
5.Boleng ba hona joale ba motlakase bo tloaelehile.
6. Leakage efe kapa efe.
7. Setiiso sa mochini haeba ho na le dutla.Tlosa sekoaelo sa lehlakore la enjene sekoaelo se latelang sa mochini oa seal seal drain, etsa bonnete ba hore ha ho na oli e tlotsang ka hare ho eona.
8. Hlahloba dikahare: Hlahloba dikahare e tlameha ho ba tlhahlobo ea kamehla mabapi le ho sebelisa boemo ba pompo, ho qoba ho hlōleha ha pompo, ho lelefatsa bophelo ba tšebeletso ea pompo.Ka kopo, sheba lenane le latelang la tlhokomelo.
Nako ea poso: Mar-24-2022